20200314_0844_fin_alto_flex_a.txt

Codename		:	Alto
Implimentation	:	Dion Patelis
File created	:	14th Jan 2020
Last print		:	14th Jan 2020

Material		:   PLA
Infill			:	Triangles
Density			:	20%
Print time		:	9hr 26min
Mass			:	50g
Filament		:	16.76m
Layer height	:	0.1
DeflectionLE	:	TBA
DeflectionTE	:	TBA
Recoil time		:	TBA

Implimentation
Front FCS tab from LE = 5.75
Foils are all the same proportions. Only chord length differs.
----------------
Base foil
FDFB  = 0 
Ch    = 115
Th    = 16%
ThFLE = 20%
TE    =	0.0086956% i.e. 1mm
LEDia = 6%
----------------
FDFB  = 10
LEOS  = -5
Ch    = 115
----------------
FDFB  = 60
LEOS  = -15
Ch    = 70%
----------------
FDFB  = 89.5
LEOS  = 28
Ch    = 50%
----------------
FDFB  = 94.5
LEOS  = 38.655
Ch    = 35%
----------------
Other
Tip fillet radius = 4.2
----------------

All dimensions in mm unless specified.
FDFB  = Foil distance from Board 
LOES  = Leading edge offset from Base foils leading edge (+ve towards stern)
Ch    = Chord
Th    = Thickness
ThFLE = Thickest point from leading edge
TE    = Trailing Edge thickness
LERad = Leading Edge Radius